Category: Airsoft – Accessories

{simplegrade:4}
Manufacturer: G&P,(Hong Kong)
Type: Body Conversion

G&P 587 AK Tactical Conversion Kit on TM AK47

The G&P 587 AK Tactical Conversion kit is a nice kit for modernizing an AK. This specific kit will accommodate wiring a battery to the rear crane stock. With a little help from mechbox.com, it was a straight forward install which I can give equal credit to G&P and TM for the quality builds of their respected products. (G&P does NOT provide install instructions). Once installed it's a rock solid AK giving it an even more evil appearance ;P

I problem to note. The foregrip top rail is almost too high. You can barely see the front post using iron sights. Not a problem if you choose to use electronic optics.

In the pic above I've already modified the kit by adding the Clubfoot stock, GWS SOPMOD Bolt and Selector and a Real K-VAR KFH Flash Hider with -14mm thread conversion.

Conversion Kit Includes:

• AK47 Metal Body Set (GP430A)
• AK47 Tactical Front Set with Grip (Black) (GP468)
• AK RAS Folding Grip (Black) (GP513A)
• AK47 Extended Battery Stock
• QD Sling Clip
• AK47 Waffle Pattern Magazine (Black) (150rds) (GP581)
• Battery Holster to prevent short circuit
• T-Shape Connector Wire for recharge
• T-Shape Connector Set

{simplegrade:5}
Manufacturer: Magpul (U.S.A.)
Type: Grip

Magpul MIAD Grip and Enhanced Trigger Guard

This is the airsoft version of the Magpul MIAD (MIssion ADaptable) Grip. This is an airsoft replica of the real Magpul MIAD grip and does not have all the comfort attachments or storage options. But it is an extremely comfortable and well built grip. The Magpul Enhanced Trigger Guard is another Magpul simple affordable solution. It fills that annoying gap between the grip and finger guard and allows for gloved shooting.

Magpul MIAD Grip

The installation was very straightforward. I've installed this grip onto my TM M4 S-System which still has stock plastic body, and it had no fitting problems whatsoever. I also installed a 2nd MIAD on my TM M4 R.I.S with Systema Metal Body, also with no problems. The motor noise has noticeably increased over the stock TM M16 grip though..

Magpul MIAD Grip – Top: TM M4 S-System. Bottom: TM M4 R.I.S.

{simplegrade:5}
Manufacturer: Magpul (U.S.A.)
Type: Stock

Magpul M93 Carbine Stock

This is the airsoft version of the Magpul M93 Carbine Stock in Flat Dark Earth. It's very unique in design and function.

Magpul M93 Carbine Stock – Full View

The modular design is unique in that it allows you to attach rails, storage or mission specific addons. Custom tail addon units that can me added are:

• MSS Battery Pack Unit – Power supply for night vision, range finders etc.
• MSS Survival/Aircraft Unit – Small profile stock with watertight storage.
• MSS Grenadier Unit – Used to store 3x40mm Grenades used in the M203

The unique functionality is you can set it to "remember" your favorite extended stock setting. The release lever is easy to actuate and can be positively locked into position. The stock can expand from 10" in length to 14" in 8 even spaced increments.

Magpul M93 Carbine Stock

The Magpul M93 Stock is made for Armalite style stock tubes. I added a device called the First Factory Hybrid Stock Base to make my G36 compatible with this stock system.

{simplegrade:4}
Manufacturer: Proud(Hong Kong)
Type: Flash Hider

Proud Noveske Style Flash Hider

If you browse any airsoft retailer, you’ll notice a bunch of mfg’s have made a Noveske Style Flash Hider. I chose to go with the Proud version becasue it was the closest match in color to Falt Dark Earth and it can be either 14mm+ or 14mm-. It’s a solid unit, but lacks the Noveske markings.

{simplegrade:3}
Manufacturer: Tango Down (U.S.A.)
Type: Vertical Foregrip

Tango Down BGV-MK46 Vertical Grip.

Is it worth $60+ bux? Maybe, but not for airsoft. I can see where this has it's advantages on a real steel rifle. Once put in place on a rail, it's going nowhere.

Ugh more problems.? Wil not work on the M4 S-System lower rail.?

Nice and well built grip though. Internal storage compartment is a plus too. An airsofter could go with a less expensive vertical grip though.

{simplegrade:5}
Manufacturer: Private Parts Airsoft
Type: Conversion Kit

Update 02/2007

Just discovered that TM Type 89 Magazines will work in the PPA Magwell. (Another great tip from AEX 😉 TM Type 89 mags will not fit in a regular Armalite style AEG though. Not only do they work, they work well in that it's a much more snug fit. Virtually no mag wobble and as with all the other Armalite style magazines, the bbs feed perfectly.

Private Parts Airsoft – G36 Magwell Conversion Kit Installed

We all know of the abundance of Armalite (STANAG) style magazines. Plus most G36 owners know it's hard to find pouches that accommodate multiple G36 magazines. The Private Parts Airsoft – G36 Magwell Conversion Kit is an incredibly easy add-on to install and enables a G36 to use Armalite style magazines. This is a well designed add-on and can easily be switched to the regular magwell.

Private Parts Airsoft – G36 Magwell Conversion Kit Installed

So far, TM Low Caps, TM High Caps, MAG Mid Caps, Star Low Caps and even my old… DTP Beta C-Mag have functioned flawlessly in the magwell conversion. With C-Mag installed it is a little trouble getting to the mag release though.

Private Parts Airsoft – G36 Magwell Conversion Kit with DTP Beta C-Mag

This is a great, affordable add-on which benefits the airsofter that owns both Armalite and G36 style AEG's