Posted on

Tokyo Marui – CAR-15

Manufacturer: Tokyo Marui (Japan)
Type: AEG (Automatic Electric Gun)
Date Acquired: 11/2009


Tokyo Marui – CAR-15

Been keeping my eye out for 1 of these TM CAR-15’s for years. Initially released in 1997, it is unique from other TM M16A1 based AEG’s due to the fore grip and butt stock.

The fore grip is a shortened version of the M16AI triangular grip and the butt stock. is a spring loaded, 2 position stock system.

Over the years, I’ve missed a few opportunities to own a TM CAR-15, but I eventually lucked out and found the previous owner took really good care of this specific AEG.


Tokyo Marui – CAR-15

Chrono Results (FPS)
.20 BB’s
Avg: 270fps

Posted on

IWG Rocket World – Ronin Hoodie Softshell

Manufacturer: IWG Rocket World (USA)
Type: Clothing


IWG Rocket World – Ronin Hoodie Softshell

Another cool creation from the IWG/Rocket World/T.A.D. Gear. The Ronin Hoodie Softshell is similar to the TAD Stealth Hoodie. Features include:

  • Small, custom, designer runs.
  • Made with classic weight 2L, "Sharkskin" soft shell fabric.
  • Soft fleece inner face for all day comfort.
  • Blocks wind and a DWR finish for water resistance against drizzle and snow.
  • Our signature AERO Hood design lays flat across the back when not in use.
  • Pre-shaped arms, for a streamlined natural fit.
  • 2 Velcro loop swatch on each sleeve to add on your favorite embroidered patch when the mood strikes.
  • Thumbhole cuffs.
  • 2 left sleeve accessory pockets with PVC media wire ports for headphone wires.
  • 2 zippered hand warmer pockets.
  • 1 zippered "napoleon" chest pocket.
  • Easy grasp mini webbing zipper pulls.
  • One color: Black.
  • Sizes XS, S, M, L, XL, XXL.
  • Made in California, USA.


Much better pics from Rocketworld

Posted on

Toy Soldier – “Hi-Speeder” Camera Strap

Manufacturer: Toy Soldier (Hong Kong)
Type: Camera Accessory


Toy Soldier – “Hi-Speeder” Camera Strap

While this is not directly an airsoft related product, it is manufactured by Toy Soldier (The same guys who released the first replica Swimmers Headset). The “Hi-Speeder” Camera Strap, is essentially a tactical camera sling.


Toy Soldier – Tactical Workshop

The Toy Soldier – “Hi-Speeder” Camera Strap features similar features you would find on a Magpul MS2 Type of sling with the quick adjustment systems. Features include.

  • QD Buckle
  • Adjustment strap for rapidly adding or removing tension with a single-hand
  • Paracord fasteners
  • Pocket on sling to carry extra memory card


Toy Soldier – “Hi-Speeder” Camera Strap – Features

The sling is very comfortable to wear and adds and additional point to add tension to steady your shot. Similar to how a rifle sling helps steady your aim. I purchased a few of these hoping to outfit my point and shoot cameras and camcorders as well, but this sling adds no more function to LCD screen based devices then the stock straps they already come with. While the Paracord attachment straps look like they won’t fit into the rectangular attachment points, they fit fine with a little effort. The adjustment strap and buckle can be operated 1 handed to quickly adjust the length of the sling.

Toy Soldier also has other products in their Tactical Photography Series.


Posted on

KWA – MP7

Manufacturer: KWA (USA)
Type: GBB PDW


KWA MP7

Airsoft Extreme was kind enough to supply us a KWA MP7 for review. The KWA MP7 is a replica of the H&K MP7 PDW (Personal Defense Weapon).

Specifications:

  • Main Outer Body = Fiber Reinforced Polymer
  • Internal Structure = Full Metal Action Housing
  • Inner Barrel = 160mm
  • Magazine Capacity = 48 rounds
  • Caliber = 6mm Airsoft BBs
  • Gas System = Force Velocity Engine [FV]
  • Velocity = 380+ fps** with 0.20 gram BB’s
  • Rate of Fire = 15 ~ 16 RPS**
  • Propellant = Green Gas
  • Dimensions = 15″ X 7″
  • Weight = 4.7 lbs

** Actual results may vary depending on temperature, type and brand of propellant used.

Special Features:

  • Official Heckler & Koch licensed product
  • Fiber reinforced polymer body
  • Functional cocking handle with realistic bolt movements
  • Metal Picatinny accessory rails
  • Retractable shoulder stock
  • Flip up adjustable front and rear sight
  • Semi and Full Auto selective fire
  • Folding front grip
  • Trigger safety


KWA MP7

The KWA MP7 (4.7 lbs) weighs over 1.5lbs more then the Tokyo Marui MP7 (3.06 lbs) and has much more metal in its’ internal build. The KWA MP7 takes Green Gas/Propane without any problem. 48 Round long magazine feeds well and bolt locks on empty magazine. The selector switch has a positive feel and it’s easy to cycle between firing selections.


KWA MP7 – Open Bolt

The full auto action is crisp with light recoil action.

Posted on

VFC – MK13 MOD 0, EGLM Deluxe

Manufacturer: VFC (Taiwan)
Type: Grenade Launcher

alt
VFC – MK13 MOD 0, EGLM Deluxe

The VFC – MK13 MOD 0, EGLM Deluxe is a replica of the FN SCAR EGLM (Enhanced Grenade Launcher Module). This deluxe version from VFC includes the following:

  • Quad Railed, Extended Butt stock Chassis
  • Leaf sight
  • Stand alone Trigger Module
  • 5.56 Trigger Module
  • 7.62 Trigger Module

alt
VFC – MK13 MOD 0, EGLM Deluxe

Let’s get the bad news out of the way first. The VFC EGLM will NOT fit on a Classic Army SCAR. The CA SCAR’s lower rail teeth do not match VFC’s SCAR. We discovered this in 2008 when Star released their EGLM which works on VFC, but not CA. See here. Will be looking into finding a way to replace the CA SCAR’s lower rail to be compatible.

The good news… Like the VFC’s SCAR’s beautiful anodized upper receiver, the EGLM has an anodized aluminum upper quad rail system.The included leaf sight uses a Larue style mount, which you may need to adjust for fitment.

alt
VFC – MK13 MOD 0, EGLM Deluxe and CA Short M203 RIS on EBB Launcher Frame

The trigger modules are easy to change out. They all utilize a single captive pin, so no worries in loosing parts.

The EGLM worked flawlessly with Mosquito Molds, Madbull, CA and G&P 40mm grenades. The launcher tube release is spring loaded with a very crisp action. The sliding butt stock is only 1 position.

Another possible problem for skirmishers is the tube is too short to launch Nerf Rockets.

Big thanks to Ting at Rhino Airsoft for taking special care on sending this order.

Update 09/18/2009

Did a side by side comparison of the VFC and CA SCARs, to see what the difference was on the lower hand guard rails. Rail wise they use a matching rail system and teeth spacing. But the CA lower rail system is mounted about .25″ to front of where the VFC rail mounts. Thus causing the rail teeth to not line up. Only possible solution I have is to remove some rail teeth off the CA SCAR to make the VFC EGLM work properly.

Update 11/20/2009

Spartan Imports sent me down an extra lower rail for the CA SCAR-L. Even when I cut teeth off and shortened the length, the EGLM would still not fit like it should. You can mount the EGLM without the trigger modules though.

alt
VFC – MK13 MOD 0, EGLM Mounted on CA SCAR-L w/o Trigger module.

Posted on

ESS Profile with Cortex Clip

Manufacturer: ESS USA
Type: Goggles

alt
ESS Profile with Cortex Clip

ESS, a long time manufacturer of tactical eye protection for the Mil/LE/Govt markets, has made a goggle just for the airsoft market. There are 2 parts to this goggle:

  1. The Cortex Clip – The Cortex clip attaches to any ESS Profile (NVG and Turbo Fan) series Goggle.
  2. ESS Profile NVG or Profile Turbo Fan goggle.

alt
ESS Profile with Cortex Clip

So, yes… The nose protector I still need to get used to visually but it does add obvious protection. The Cortex Clip is a made of a rigid type of plastic.

The ESS Profile Goggles themselves are built for ventilation. But as with all Goggles, in the right situation, it can fog. Will have field details of this product in a couple of weeks.

alt
ESS Profile with Cortex Clip Separated

The Cortex Clip can be completely removed from the Profile goggles, but the Cortex Clip adds specific side entry protection from aisoft bb’s.

Posted on

Rhino Airsoft – Hong Kong


Rhino Airsoft
Hong Kong

I’ve know of the owner Ting from his inital venture, Russian Mania Workshop, due to being a News Moderator on Arnie’s. But I just personally started working with him recently.

Rhino Airsoft looks to be another solid choice for a Hong kong based airsoft retailer. Ting has been in the Hong Kong airsoft community for many years, and offers some uniquue items on site.

Communication was good. Order placed/shipped on 08/31 and received 09/10.

Posted on

Airsoft Park – China


Airsoft Park
China

Initially purchased from them in August 2009.

Looks to be a competitor to EB Airsoft.

  • Shipping is included with all prices
  • Selling of unlicensed copies of products (Including Magpul PTS)
  • Located in China

Communication was good. Order placed/shipped on 08/21 and received 09/04.

Posted on

AR74 – 5.45×39

  • Adams Arms – 5.45×39 Piston Upper
    • Adams Arms 16? Carbine Barrel
    • 1:8 Right Handed Twist
    • M4 feed Ramps
    • Chambered in 5.45×39 Russian
    • Melonited Piston Parts, Barrel, Bolt Carrier, and Flash Hider
    • Ionbonded 5.45×39 Bolt
  • JD Machine – Striped Lower Receiver
  • RRA – Lower Parts Kit
  • Magpul – MOE Hand Guard
  • Magpul – MOE Polymer Rails
  • Magpul – MOE RVG
  • Magpul – CTR Stock (commercial)
  • Magpul – MIAD Grip
  • Magpul – ASAP
  • Magpul – MBUS Sight Set
  • Prince 50 Mag Lock
  • Watson Weapons Takedown Pin with Pull ring
  • Commercial Buffer Tube Assembly
  • C Products – 5.45×39 Magazines

1 of the interesting things I experienced building this, was the huge difference in quality of stripped lower receivers. A couple of years ago I completed my first stripped lower AR build with a CMMG lower and DPMS Lower Parts kit. The build went together like butter. This time I had a JD Machine stripped lower and RRA lower parts kit. These parts didn’t fit together as well as my previous build (i.e. receiver pins do not slide out smoothly, trigger guard pin holes slightly off) not sure whether it’s the lower or lpk or both to blame.

Due to this being a piston based upper. I had to Dremel tech Magpul – MOE Hand guard to accept the wider diameter drive rod.

Posted on

PX Airsoft – Hong Kong


PX Airsoft
Hong Kong

Initially purchased from them in August 2009.

Another good Hong Kong retailer. They seem to have a unique product mix. Ordered some small quantity, low dollar amount parts, but service was as good as if I had a larger order. Order placed on 08/02 and shipped 08/05.